Extreme Over the Tire Rubber Tracks

See Chart below to see what OTT Track size you need for your machine. 

Extreme Over the Tire Rubber Tracks will turn your skid steer into a powerful track machine. Installation is 25 minutes or less time. These tracks added to your skid steer will give you the flotation and traction you will need to operate in wet muddy conditions. These tracks will also work well on concrete and asphalt without marking the surface. Extreme Over the Tire Rubber Tracks will turn your skid steer into a powerful track machine. Installation is 25 minutes or less time. These tracks added to your skid steer will give you the flotation and traction you will need to operate in wet muddy conditions. These tracks will also work well on concrete and asphalt without marking the surface.

Features:

• Increases the tire life on the host machine - tires will not wear while tracks are installed.
• Embedded Iron Core with Engineered Wing Design - Avoids detracting like a non-reinforce, all rubber over-the-tire track.
• Internal Traction Rib - Provides high traction between your tires and the track, preventing tire wear.
• Full Rubber Track - Allows operation on asphalt, concrete, and turf surfaces without causing damage or leaving marks.
• Full Width, Continuous Rubber Track Footprint - Increases floatation by 5 times higher than tires and by at least twice as much as a standard steel over-the-tire track.

Choose your machine setup below: